Easy to apply braking pressure by piping factory air pressure.
This Pneumatic Disc Brake has high heat resistance and is easy to install.
Suitable for paper making machines, wire drawing machines and amusement equipment.
The type brake is for horizontal-type installation, Add the expandable shrapnel to guarantee the brake balance, The friction part is easy to replace, and it does not contain any asbestos,
To control the deceleration of moving parts for small and medium powers, the best solution is the combination of a brake disc with one or more pneumatic calipers.
Size | DBH 104 | DBH 105 |
Maximum under overload | 7 kg/cm² | 7 kg/cm² |
Compression ratio | 1.83 | 1.83 |
Disc thickness | 10 mm | 10 mm |
Disc O. D. mm | 200↑ | 200↑ |
Unit Weight | 8.5 kg | 9 kg |
Torque versus Pressure
Size | X | Y | φZ |
DBH 104 | 132 | 267.5 | 142 |
DBH 105 | 152 | 285 | 177 |
Size | DBH 204 | DBH 205 |
Maximum under overload | 7 kg/cm² | 7 kg/cm² |
Compression ratio | 1.83 | 1.83 |
Disc thickness | 20 mm | 20 mm |
Disc O. D. mm | 200↑ | 200↑ |
Unit Weight | 9 kg | 9.5 kg |
Torque versus Pressure
Size | X | Y | φZ |
DBH 204 | 135 | 267.5 | 142 |
DBH 205 | 155 | 285 | 177 |
Warning : The initial torque on new units can be 30% to 50% less then the catalogue value until the friction facing and friction disc are lapped or worn in.
Copyright © 2022 All Right Reserved