PT. AKURAT TEKNIK ABADI
Menu
Share to :
| SIZE | NAC 2 | NAC 5 | NAC 10 | NAC 40 | NAC 60 |
| Static Torque kgfm | 2 | 5 | 10 | 40 | 60 |
| Bore Dia φdH7 | 20 | 25 | 35 | 50 | 60 |
| Keyway b x t x l | 5 x22.3 x 30 | 6X27.8×30 | 10X38.3X40 | 12X53.3X60 | 18X64X95 |
| Unit Weight kg | 3 | 5.5 | 13 | 23 | 50 |
| Size | B | C | D | E | F | G | H | I | J | K | L | M | N | P | S |
| NAC 2 | 115 | 120 | 90 | 65 | 35 | 90 | 24.5 | 18 | 17 | 5 | 5.5 | M6 | 11 | M6 | 80 |
| NAC 5 | 153 | 142 | 110 | 76 | 47 | 100 | 32 | 24 | 18 | 7 | 6 | M6 | 14 | M6 | 95 |
| NAC 10 | 205 | 185 | 140 | 105 | 69.5 | 138 | 38 | 30 | 22 | 17 | 9 | M8 | 16 | M10 | 125 |
| NAC 40 | 258 | 226 | 164 | 125 | 82 | 175 | 51 | 38 | 40 | 24 | 8 | M10 | 16 | M10 | 145 |
These clutches are normally air –operated at pressure up to 6 bar/ 90 psi.
The maximum energy per engagement figures quoted is based on a frequency of engagement
not exceeding 30 per hour.
The clutch assembly comes lubricated and ready to install. Grease nipples are fitted to the piston and cylinder for periodic lubrication of the thrust bearing. Use a good grade bearing lubricant. Do not over grease.
Copyright © 2022 All Right Reserved
